Login to Download:  * Manual Download

Our Lead-free titanium alloy soldering pot passed by SGS, built-in advanced microcomputer digital control and display system, make it more safe, more steady and more accurate. It’s a good tool for electronic fields.

FEATURES:

* With malfunction alarm.

Working conditions:
Working voltage: AC220±10V
Working temperature: 0-55℃
Working temperature: < 90% no dew
WARNING:
1. The soldering pot must be put on the balanced and ovenproof working desk, prevent the glowing tin go out of the pot. And also take care of the hot tin and the hot body.
2. Do not put other pb items together with the lead-free soldering pot, prevent pb pollution. If cause the products do not eligible, then we won’t take on this liability.
3. It can’t be used where it will be exposed to ignitable or corrosive materials and gases.
4. If you need to move the soldering pot, please turn off the switch and move it after the pot turn cool.
5. The pot is a hot equipment, if you no need to use, please shut off the switch, and put out the plug.
6. In order to keep it safe and prolong the life, it’s better stop working after it has worked more than 12hours.
7. Do not heating the pot when it’s empty, and use the power supplier with grounding cord.
8. The pot is made of titanium which import from Japan, after it is heated by hot temperature, the color will turn to golden or blue, it’s natural for the material.
OPERATION:
1. Set temperature:
  Press the “ * ” button, the left LED will display “∟”,and the right LED will display numerical value, then press the “+” or “-”button, temperature will go up or down. Press “ * ” button, the  value of temperature will be saved.
2. Microcomputer adjusting itself
  If the temperature has obvious discrepancy, we can adjust the inside P, I, D value, it will make the pot with accurate control, the followings are two ways of P, I, D adjusting:
A. Auto adjusting
Keep pressing “+” button, then press “ * “, the left LED will display “AT”; the right LED will display “_ _ _”. Then press “ – “ or “ + “ change the “_ _ _” to “AT”, this time please press “ * “ for 3 times, then the pot will begin P, I, D adjusting itself. Usually it will take for about 15-30 minutes to finish this adjusting, during this adjusting the temperature will fluctuate obviously, but it’s no wonder. Usually, we do not recommend the users use P, I, D adjusting.
B. Adjust the value of P, I, D by manual (Do not advise users use this way, it’s fit for the engineers who know P, I, D very well, otherwise maybe cause bad temperature control. If really need, we just recommend the first way.) The operation as follows: Keep pressing “ + “, then press “ * “, the LED will display above (A) setting mode, press “ * “ again the LED will display the value of P, I, D. Manual adjusting just can be set the original value.
Remarks: The original of P, I, D value is: P=20, I=80, D=20; If the temperature in 
confusion, please set the P, I, D value as original value.
3. Calibration between display and real temperature.
After the heater was replaced or the sensor was oxidated, the temperature will occur warp, the users need to calibrate the pot termly, and as the follow steps:
A. Press “CAL” button (If your pot without this button, please open the front cover, there is a black button on the PCB of temperature control, that is CAL), the right LED will display OFF, keep pressing “ – “, and press “ * “ at the same time, the left LED will display “LOC”, the right LED will display “-3-“, then press “ * “ for 3 times (just this button, do not press any other buttons), the LED will display: The first time: Left “∟H”, right “999”; The second time: Left “∟L”, right “0”; The third time: Left “∟L”, then please input the value of temperature compensation. This value is the warp between display temperature and real temperature. For example, the real temperature is more 5℃ higher than the display temperature, it can use “ – “ to set -5; If the real temperature is 5℃ less than the display temperature, it can use “ + “ to set 5.
B. The warp temperature is the value to input, after finish setting, press “ * “ again, the set value will be saved. Then press “CAL” (If your pot without this button, please open the front cover, there is a black button on the PCB of temperature control, that is CAL), it will come into the ordinary display mode.
TROUBLE SHOOTING:
1. Turn on the switch but no reflection, please check the fuse, and the plug.
2. The LED display setting temperature, but the pot temperature won’t go up, it means that the heater is open circuit.
3. The pot display “Err” when the power switch is turned on, it means that the sensor is open circuit.

Payment

Accept payment for PayPal, WesternUnion, AliPay, MonetyGram, Sigue, Ria, Bank transfer & Credit card

Shipment

1. Airmail Registered: If you choose this option, your item will be sent by Singapore Post Airmail. The delivery time varies from 15-45 days in different countries. For more details, you can visit: https://track.4px.com/

2. DHL: If you choose this option, your item will be sent by DHL Express. The delivery time is 3-5 working days. Before you choose this option, please check if your location is in the DHL Remote Areas list. You can visit: https://www.dhl.com/

3. EMS: If you choose this option, your item will be sent by EMS Express. The delivery time varies from 5-20 days in different countries. For more details, you can visit: https://www.ems.com.cn/english

4. The shipping time may be delayed in busy seasons. For more details, please feel free to contact us.

We are only responsible for the tax/duty generated in China.
We are NOT responsible for any tax/duty in the destination countries.
If you need items to declare the value of the customs, please leave us message.

• For IC Chipsets, there are generally two conditions
  1) Original New: Original new chips are taken from manufacturer vacuum sealed package with QA/QC markings, which means they are all well verified and tested. The quality is superior.
  2) Manufacturer Refurbished: Manufacturer refurbished chips are renewed and tested by the manufacturer. They quality is secondary to original new chips.
  
• You can check the items as soon as you receive them. If you find the quality not acceptable, you can return them to us within 90 days, and we are assured to replace them or refund you.
  
• If the chips are already soldered and not in selling condition, they cannot be returned.
  
• We guarantee to ship out your order within 1-2 working days. If you do not receive your purchase within 60 days, you can ask for a full refund.