LCR-TC1 3.5 Colorful Display Multi-functional Tester-TC1 TFT Backlight Transistor Tester

LCR-TC1 3.5inch Colorful Display Multi-functional TFT BacklightTransistor Tester for Diode Triode Capacitor Resistor Transistor LCR ESR NPNPNP MOSFET

Notice: Before measuring capacitance , the capacitor must be discharged , otherwise very likely damage the meter.
***This product contains a built-in battery
Features:
It can be widely used to detect NPN and PNP transistor,capacitor, resistor, diode, triode, N-channel and P-channel MOSFET, IGBT, JFET,triac and battery etc.
It can also beused to detect infrared wave forms.
It also can detect zener diode and has the function ofself-calibration.
After detection, align the infrared remote control withthe "IR" light, then press the button in the remote control, if thedetector successfully decode it, it will display the data code and infraredwave form.
One button operation, automatically detect and shutdown,and you can press the multi-functional button to close the detector too.
Put the pins of component in corresponding area, thendial the little handle and the detector will test it automatically, finally theresults will display on the back light TFT screen clearly.
Not like the usual black and white display, thisdetector will show results in color.
Specifications:
Display: 3.5inch TFT Screen
Diode Range: < 4.5V
Zener Diode:Transistor Detect Area: 0.01-4.5V
Zener Diode Detect Area: 0.01-30V
Triac Range: IGT < 6mA
Capacitance: 25pF-100mF
Resistor: 0.01-50M?
Inductance: 0.01mH-20H
Battery: 0.1-4.5V
Power Mode: Rechargeable Lithium Battery (INCLUDED)
Item Size: 8.8 x 8 x 2.8cm / 3.47 x 3.15 x 1.10in
Item Weight: 111.5g / 3.94oz
Package Size: 14.5 x 12 x 2.7cm / 5.71 x 4.73 x 1.06in
Package Weight: 114g / 4.02oz
NEW Function:
1:Automatic detection of NPN and PNP transistors, n-channel and p-channel MOSFET, diode (including double diode), thyristor, transistor, resistor and capacitor and other components
2: Automatic test the pin of a component, and display on the LCD
3:Can detect the transistor, MOSFET protection diode amplification coefficient and the base to determine the emitter transistor forward biased voltage
4: Measure the gate and gate capacitance of the MOSFET threshold voltage
5:Use 12864 liquid crystal display with green backlight
Description:
1,One -button operation, automatic shutdown .
2,Only 20nA shutdown current.
3,Automatically detect NPN, PNP bipolar transistors , N -channel and P -channel MOS FET, JFET , diodes , two diodes, thyristors small power unidirectional and bidirectional thyristor.
4,Automatic identification components pin arrangement .
5,Measuring bipolar transistor current amplification factor and base - emitter threshold voltage.
6,Via the base - emitter threshold voltage and high current amplification factor to identify Darlington transistors.
7,Can detect bipolar transistors and MOS transistors protection diodes.
8,Measuring the gate MOS FET threshold voltage and the gate capacitance.
9,Can simultaneously measure two resistors and resistor symbol is displayed. Displayed on the right with a decimal value of 4 . Resistance symbol on both sides shows the pin number. So you can measure the potentiometer. If the potentiometer wiper is not transferred to an extreme position , we can distinguish the middle and both ends of the pin.
10,Resistance measurement resolution is 0.1 ohms , 50M ohms can be measured .
11,Can measure capacitanceCan measure capacitance of 30pF-100mF , resolution 1pF.
12.2uF more capacitors can simultaneously measure the equivalent series resistance ESR values. The two can be displayed with a decimal value , resolution 0.01 ohms.
13,Can be in the correct order and the diode symbol display two diodes , and gives the diode forward voltage.
14.LED is detected as a diode forward voltage higher . Combo of the LED is identified as two diodes.
15,Eeverse breakdown voltage is less than 4.5V Zener diode can be identified.
16,Can measure a single diode reverse capacitance. If the bipolar transistor connected to the base and collector or emitter of a pin , it can measure the collector or emitter junction reverse capacitance.
17 can be obtained with a single measurement rectifier bridge connection.
Package Included:
1 x Pocketable Transistor tester is the LCR - TC1 full color graphics display


Range:
* Review Detail:
* Verification Code:
		Leave a credit review !

Payment

Accept payment for PayPal, WesternUnion, AliPay, MonetyGram, Sigue, Ria, Bank transfer & Credit card

Shipment

1. Airmail Registered: If you choose this option, your item will be sent by Singapore Post Airmail.

The delivery time varies from 15-45 days in different countries. For more details, you can visit:

http://track.4px.com/?locale=en_US

2. DHL: If you choose this option, your item will be sent by DHL Express.

The delivery time is 3-5 working days. Before you choose this option, please check if your location is in the DHL Remote Areas list.

You can visit: http://www.dhl.com/

3. EMS: If you choose this option, your item will be sent by EMS Express.

The delivery time varies from 5-20 days in different countries.

For more details, you can visit: http://ems.com.cn/english.html

4. The shipping time may be delayed in busy seasons. For more details, please feel free to contact us.

We are only responsible for the tax/duty generated in China.
We are NOT responsible for any tax/duty in the destination countries.
If you need items to declare the value of the customs, please leave us message.

For IC Chipsets, there are generally two conditions
1) Original New: Original new chips are taken from manufacturer vacuum sealed package with QA/QC markings, which means they are all well verified and tested. The quality is superior.
2) Manufacturer Refurbished: Manufacturer refurbished chips are renewed and tested by the manufacturer. They quality is secondary to original new chips.
You can check the items as soon as you receive them. If you find the quality not acceptable, you can return them to us within 90 days, and we are assured to replace them or refund you.
If the chips are already soldered and not in selling condition, they cannot be returned.
We guarantee to ship out your order within 1-2 working days. If you do not receive your purchase within 60 days, you can ask for a full refund.